Measure models a gap with the historical average when it can, and with the building classification average when it can't. Here's how each one is calculated:
Historical average
Modeled consumption = average daily usage × days in the gap
Measure looks at the 365 days ending with your latest actual bill in the inventory year.
That window needs at least 180 days of actual data. For the current year, the minimum is prorated to how much of the year has passed.
Each bill becomes a daily rate, and the rates are averaged across the days that have data.
For example, 546,000 kWh over 273 days is 2,000 kWh a day, so a 92-day gap is modeled at 184,000 kWh.
Building classification average
Modeled consumption = floor area × energy use per sq ft per year × (days in gap ÷ 365)
Factors come from the U.S. Building Performance Database (BPD), effective 2025, published February 2026.
Natural gas factors are in kBtu and are converted to MMBtu (× 0.001).
Measure matches the facility's sector, category and building type. If one is missing, it uses a broader factor, and the note says what to add.
For example, 263,716 sq ft × 37 kBtu × 0.001 × 273 ÷ 365 = 7,298.07 MMBtu.
FAQs
Why can't I model this activity? Usually there's no actual bill in the inventory year, there are fewer than 180 days of history, two bills for the same resource overlap by more than a week, or the activity is measured in spend, distance or weight. The building classification average also needs a facility with a floor area, and an inventory year of 2025 or later.
My facility is closing and has no bills this year. Can I model it? Not with the historical average. Use the building classification average if the facility has a floor area.
Does modeling account for seasonality? No. Both methods spread usage evenly across the gap.
Can I choose which months or which year to average from? Not today.
Can I model from an intensity, like energy per unit produced? Not today.
Can we change the 180-day minimum? No. It's the same for every organization.
What do I give an auditor? The note on each modeled record. It shows the source, the days modeled and the full calculation.
