Skip to main content

Modeling Missing Consumption Data

Data modeling fills gaps in an activity's consumption with an estimate, so your inventory is complete before emissions are calculated. Every modeled record shows exactly how its value was calculated.

The two methods

Method

How it estimates

Used when

Historical average (recommended)

Your actual daily usage from the past 365 days × the days missing

The activity has at least one actual bill in the inventory year and enough history

Building classification average

Floor area × typical energy use per sq ft for the building type, from the U.S. Building Performance Database

The historical average isn't available. Electricity and natural gas only, including leased assets, for 2025 inventories onward

Refrigerants and anything measured in spend, distance or weight can't be modeled. For more specifics around methodology calculations, check out Data Modeling Methodology.

Model many activities at once

  1. Go to Inventory Data and filter to the activities you want to model.

  2. Choose Model missing data next to the data completeness bar.

  3. On Ready to model, check the method and preview for each activity. Remove any you want to leave out.

  4. Choose Model. A summary shows what was modeled.

To model one facility, open it and choose Model data from the menu next to its Associated activities count.

Model a single activity

  1. On the activity's Consumptions tab, click a missing period. Missing periods are highlighted in red.

  2. Choose Model missing data, pick a method and review the calculation.

  3. Choose Model data. Every missing period for that activity in the year is filled.

Activities that need review

Activities on the Needs review tab could be modeled if their facility had more details. Choose Missing data, add the floor area and building classification (sector, category and building type), and save. After a few seconds they move to Ready to model.

Using your own method

If neither method fits, for example when you'd rather use last year's data or seasonal months, you can enter your own estimate:

  1. On the activity's Consumptions tab, add a consumption record manually for the missing dates.

  2. Enter your modeled value.

  3. Set Calculation Method to Manually modeled.

  4. Add a note describing your method and how you calculated the value, then save.

The record counts as modeled data, and your note gives auditors the same trail as a Measure-modeled record.

After you model

Modeled records show Modeled in the Calculation Method column, with a note explaining the calculation. When the real bill arrives, delete the modeled period and add the bill.

Did this answer your question?